Introduction
Electrical contact cleaner is a product used to clean and protect electrical contacts and other metal surfaces. It is used to remove dirt, dust, and other contaminants that can cause electrical problems. Consumer Reports has tested and rated a variety of electrical contact cleaners to help you find the best one for your needs. This review guide will provide an overview of the different types of electrical contact cleaners, their features, and the ratings from Consumer Reports.
Types of Electrical Contact Cleaners
There are several types of electrical contact cleaners available on the market. The most common types are aerosol sprays, liquid solutions, and wipes. Each type has its own advantages and disadvantages.
Aerosol Sprays: Aerosol sprays are the most popular type of electrical contact cleaner. They are easy to use and provide a quick and effective cleaning solution. However, they can be messy and may leave a residue on the surface.
Liquid Solutions: Liquid solutions are a more concentrated form of electrical contact cleaner. They are more effective at removing dirt and grime, but they can be difficult to apply and may require more time to clean.
Wipes: Wipes are a convenient and easy-to-use form of electrical contact cleaner. They are pre-moistened and can be used to quickly clean and protect electrical contacts. However, they may not be as effective as other types of cleaners.
Features to Consider
When choosing an electrical contact cleaner, there are several features to consider. These include the type of cleaner, the cleaning power, the drying time, and the safety of the product.
Type of Cleaner: As mentioned above, there are several types of electrical contact cleaners available. Consider the type of cleaner that best suits your needs.
Cleaning Power: The cleaning power of an electrical contact cleaner is important. Look for a product that is effective at removing dirt, dust, and other contaminants.
Drying Time: The drying time of an electrical contact cleaner is also important. Look for a product that dries quickly and leaves no residue.
Safety: Safety is an important factor to consider when choosing an electrical contact cleaner. Look for a product that is non-toxic and safe to use.
Consumer Reports Ratings
Consumer Reports has tested and rated a variety of electrical contact cleaners. The ratings are based on the type of cleaner, the cleaning power, the drying
electrical contact cleaner Comparison Table
Top electrical contact cleaner Reviews By Consumer Reports March 2023
Below is the list of best electrical contact cleaner with a detailed guide that you can consider in your purchase:
WD-40 Specialist Contact Cleaner Spray, 11 oz.
$7.28 in stock
Features
- WD-40 Specialist Contact Cleaner is ideal for removing oil, dirt, flux residue, and condensation from sensitive electrical equipment. This quick drying, residue-free formula is safe on metal and plastic
- Cleans sensitive electric equipment. Quick drying. Safe to use on most plastics 1, rubbers and metals. 1 Test on plastic before using, and avoid adhesives, device screens, and keyboards
- WD-40 Specialist offers easy solutions for specific problems. WD-40 Specialist line is designed with industrial strength quality for your tough jobs
- Blast away oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment with pinpoint precision. It's ideal for use on printed circuit boards, controls, switches, precision instruments and electric panels
- WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right
Hosa D5S-6 CAIG DeoxIT 5% Spray Contact Cleaner, 5 oz.
$16.99 in stock
2 used from $24.99
Features
- Cleans, protects, lubricates, and improves conductivity
- Reduces intermittent connections, arcing, and RFI as well as wear and abrasion
- Safe for use on all metal connectors and contacts and will not harm plastics
- Dispensing Type: Spray
- Volume: 5 oz
CRC QD Contact Cleaner, 11 Wt Oz, Industrial Strength, Quick Drying, No Residue, Plastic-Safe Electronics Cleaner, Safe For Sensitive Electronics, Aerosol Spray
Features
- CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools and electrical equipment
- QD Contact Cleaner: Helps to effectively eliminate dust, light oil, grease, and dirt from sensitive electronics and electrical equipment. This cleaner evaporates quickly, leaving no residue behind, and is safe to use on all plastics.
- FORMULA: QD Contact Cleaner evaporates quickly, leaving no residue behind and is safe to use on all plastics. Use where lower flashpoint cleaners are acceptable.
- APPLICATIONS: This liquid contact cleaner is ideal for use on telephones, PCs, relays, edge connectors, tape heads, busbars, circuits, contacts, printed circuit boards, switches and breakers.
- PRODUCT SPECIFICATIONS: QD Contact Cleaner is available in an 11 wt. oz. aerosol can. This product is NSF K2 Registered.
CRC QD Contact Cleaner 03130 – 11 WT OZ, Plastic Safe Electronics Aerosol Cleaner, Suitable for Sensitive Electronic Equipment
Features
- CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment
- QD Contact Cleaner: Helps to effectively eliminate dust, light oil, grease, and dirt from sensitive electronic equipment. This cleaner evaporates quickly, leaving no residue behind, and is safe to use on all plastics.
- FORMULA: QD Contact Cleaner evaporates quickly, leaving no residue behind, and is safe to use on all plastics. Use where lower flashpoint cleaners are acceptable.
- APPLICATIONS: This liquid contact cleaner is ideal for use on telephones, PCs, relays, edge connectors, tape heads, busbars, circuits, contacts, printed circuit boards, switches and breakers.
- PRODUCT SPECIFICATIONS: QD Contact Cleaner is available in 11 WT OZ aerosol spray can. This product is NSF K2 Registered.
WD-40 Specialist Contact Cleaner Spray, 11 oz. & Permatex 81150 Dielectric Tune-Up Grease.33 oz Tube
$11.27 in stock
Features
- Product 1: WD-40 Specialist Contact Cleaner is ideal for removing oil, dirt, flux residue, and condensation from sensitive electrical equipment. This quick drying, residue-free formula is safe on metal and plastic
- Product 1: Cleans sensitive electric equipment. Quick drying. Safe to use on most plastics 1, rubbers and metals. 1 Test on plastic before using, and avoid adhesives, device screens, and keyboards
- Product 1: WD-40 Specialist offers easy solutions for specific problems. WD-40 Specialist line is designed with industrial strength quality for your tough jobs
- Product 1: Blast away oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment with pinpoint precision. It's ideal for use on printed circuit boards, controls, switches, precision instruments and electric panels
- Product 2: Protects electrical connections and wiring from salt, dirt and corrosion
Akfix A60 Electrical Contact Cleaner Spray - Non-Corrosive Flux Remover, Electronic Spray Cleaner for Computers, Keyboard, Monitor Screen, Battery, Safe Metal Cleaner | 1 Pack, Can, 6.7 Oz.
Features
- Since the electrical components and equipment are so delicate, regular cleaners should not be used to clean them. Here is Akfix A60 Contact Cleaner for that! Spray and finish it thanks to its special formula.
- - The essential characteristic of our electronic cleaner spray is the capacity to swiftly evaporate, leaving no residue.
- Effectively removes dirt, light oil, grease, flux and dust from electrical equipment and electronic devices. It is recommended to be tested on sensitive plastics, adhesive-mounted or stressed parts.
- - This contact cleaner is equipped with a unique non-corrosive formula to make the connectors and contact parts more efficient to use.
- A60 metal cleaner spray is an economic cleaning spray that is ideal for computer, battery, keyboard, and digital equipment. You can easily use it to clean any type of metal connector and contact.
CRC QD Electronic Cleaner 05101 – 4.5 Wt. Oz., Plastic Safe Cleaner, Safe for Sensitive Electronics
2 used from $15.99
Features
- CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment
- QD ELECTRONICS CLEANER: A precise cleaner made from petroleum distillate and alcohol that is fast evaporating and leaves no residue.
- FORMULA: With quick-drying, plastic safe, residue-free features, this cleaner is ideal for even the most sensitive electronics and will help to prevent contact failure.
- APPLICATIONS: QD Electronic Cleaner is ideal for use on computer components, circuit breakers, circuits, coin mechanisms, contacts, flux removal, sockets, lighting, plastics, nylon, plugs, relay switches, PVC, and more!
- PRODUCT SPECIFICATIONS: QD Electronic Cleaner is available in a 4.5 wt. oz. aerosol can.
CAIG LABORATORIES DeoxIT D100L-2DB Brush Applicator, More Than A Contact Cleaner, 7.4mL, Pack of 1
$16.99 in stock
Features
- SEE IMAGES FOR FULL DESCRIPTION AND INFORMATION
- Improves Conductivity without Shorting, Cleans, Deoxidizes, Lubricates and Protects, Reduces Intermittent Connections
- Reduces Arcing & RFI, Reduces Wear & Abrasion
- Ideal for applications in all industries; Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc.
- USES - ELECTRICAL: ALL Metal Connections; Batteries, Light Bulbs, Switches and Relays, Jacks and Plugs, Harnesses, Grounding Blocks, RCA jacks, XLRs, USB, HDMI, Ethernet, etc.
CRC 05018 Lectra-Motive Electric Parts Cleaner - 19 Wt Oz.
$6.52 in stock
1 used from $16.95
Features
- non-flammable formula
- dissolves grease, oil, dirt and wax
- this aggressive cleaner is specifically for energized electrical equipment.
- a unique alternative to 1,1,1 trichloroethane for degreasing applications
- this item is not for sale in catalina island
Fiberglass Scratch Brush Pen - 3 Pack - Jewelry, Watch, Coin Cleaning, Electronic applications, Removing rust and corrosion
Features
- Great for jewelry, watches, coin cleaning, tight places, electronic applications, removing rust and corrosion, and so much more.
- Product size 4.5" X 0.4" X 0.3" Inches (113 X 10 X 7mm)
- Brush size 1.7" Inches (42mm)